MAGNETIC BROOM

The magnetic broom is used to collect metal impurities (nails, screws, iron dust, etc.).

We offer several types of magnetic brooms:

  • Megnetic broom loaded with ferrit magnets
  • Megnetic broom loaded with neodimium magnets

The magnetic broom filled with ferrite magnets is recommended for collecting larger metal impurities (nails, screws), and the magnetic broom filled with neodymium magnets for smaller metal impurities (iron dust).  We manufacture magnetic brooms in different sizes from 300mm to 1000mm. Depending on the needs of our customers, we can also produce larger sizes. It can be used in workshops, factories, parking lots, airports, warehouses and even on lawns. The magnetic broom protects cars from punctures and workers or passers from injuries.

This type of magnetic metal separator – the magnetic broom – is very easy to handle.

Cleaning the magnetic broom is simple, which is done by pulling up a lever that is located on the handle of the magnetic broom. In this way, we can easily and quickly collect the metal contamination in one place.

In addition to these two types of magnetic brooms, there is another type:

  • Magnetic broom for forklift

This type of magnetic broom is 1200mm long and can be easily attached to the forks of the forklift. When the magnetic broom is placed on the forks at the right height from the ground, the magnetic broom collects the metal impurities as we move with the forklift. It is also suitable for collecting nails, screws and iron dust.

Cleaning this magnetic broom is very easy. You have to pull the two levers towards you at the same time, which are located in the middle of the magnetic metal separator, and this will cause the metal impurities to fall.

We recommend filling the magnetic broom with ferrite magnets, but we can also make it with neodymium magnets if required.

Areas of application:

In metalworking plants

In casting industy

In the car industry

At the airport

In parking lots